Epoxy Flooring in San Marco, FL — Garages, Historic Homes & Light Commercial
Flake, metallic, and polyaspartic floors for San Marco's garages, premium homes, and the boutiques and offices around San Marco Square. We're about 12 minutes from the neighborhood, and every slab gets a free ASTM moisture test before we quote — built for Northeast Florida's year-round humidity and high water table.
Epoxy Flooring Built for San Marco's Garages & Historic Homes
San Marco is one of Jacksonville's most historic and sought-after in-city neighborhoods — the lion fountain and walkable shops of San Marco Square, the brick streets, and the older brick-and-Mediterranean homes that surround them along the St. Johns River just south of downtown. Most of what we coat here is the garage on those premium properties, but we also finish the boutiques, salons, and small offices that ring the Square. We install flake, metallic, and polyaspartic systems that turn a stained, dusty slab into a clean, easy-to-rinse floor that suits a home with character — and the same durable, low-odor coatings for the light-commercial spaces along San Marco Boulevard.
The catch with San Marco slabs is moisture. Northeast Florida's heat and year-round humidity sit on top of a shallow water table, and that pushes moisture vapor up through concrete poured on grade — especially in the older homes near the river. A garage or shop floor that measures high for moisture-vapor transmission will delaminate a coating fast. That is why every garage and commercial job starts with a free ASTM moisture test — a calcium-chloride or RH reading, not a guess — and a moisture-mitigation primer when the numbers run past the threshold.
San Marco sits about 12 minutes from our shop, so we're close by for the walkthrough and the install. Whether it's a flake garage floor on a brick bungalow off Hendricks Avenue or a metallic finish for a shop near the Square, the hours of diamond grinding, moisture testing, and crack repair before any coating goes down are what separate a floor that lasts two years from one that lasts twenty — and every install is backed by a written 25-year transferable warranty. See our full range on the Ascent Epoxy Jacksonville home page.
Get a Free San Marco Quote
Every San Marco project starts with a free on-site assessment and a slab moisture test before we put a number on paper.
Why San Marco Owners Choose Ascent Epoxy Jacksonville
Engineered for Northeast Florida's humidity and high water table, priced transparently, scheduled around your day.
Free
On-Site San Marco Assessment
We come to your home, garage, or shop for a real walkthrough — measure the slab, test moisture, talk finishes, and leave a written line-item quote. No phone quotes.
Durable
Garage & Light-Commercial Systems
Flake, metallic, and polyaspartic floors built for the daily use of San Marco's home garages, plus the boutiques, salons, and offices around San Marco Square.
Tested
Moisture-First Prep
A free ASTM moisture test on every slab. San Marco's high water table is the number-one reason epoxy peels here — so we test first and add a moisture-mitigation primer when the readings demand it.
Free
Free On-Site Estimates
We come to your San Marco home or business, measure the space, look at the slab, and talk through finishes. You get a written quote before any deposit, with no obligation.
Written
25-Year Transferable Warranty
One page, plain English, naming what's covered: peeling, delamination, hot-tire pickup. No asterisks pointing to clauses that void the whole thing.
Direct
One Point of Contact
One number from quote through final walkthrough — the same team coordinating your San Marco install end to end. No call-center handoffs.
San Marco Epoxy Flooring — Frequently Asked Questions
Straight answers on garages, slab moisture, pricing, and scheduling for San Marco and the rest of Duval County.
Yes — the garage floor is the heart of what we do in San Marco, from the brick bungalows and Mediterranean-style homes around San Marco Square to the older riverside properties along Hendricks Avenue. The one- and two-car garages on these character homes are exactly what we coat. We install flake, metallic, and polyaspartic systems that handle daily wear and rinse clean, and we run a free ASTM moisture test on every slab before we quote so the shallow water table does not delaminate the coating six months later.
San Marco sits low against the St. Johns River with a shallow water table and Northeast Florida's year-round humidity, and many of its garage and home slabs were poured on grade where moisture vapor rises up through the concrete. That vapor is what pushes a coating off the slab. We run a free ASTM moisture test (F1869 / F2170) on every floor before coating; if readings are high we add a moisture-mitigation primer first. Skipping this step is the number-one cause of epoxy peeling in Duval County.
Every San Marco floor is priced after a free on-site visit, because the price depends on the size of the space, the condition of the slab (cracks, old coatings, moisture), the system and finish you choose, and the prep the concrete needs. The visit includes a free ASTM moisture test, and we give you a written, line-item quote afterward. Call (904) 441-5056 or request a free estimate for your exact price, with no obligation.
Often, yes. Most one- and two-car residential garages in San Marco are a one-day install with a fast-cure, UV-stable polyaspartic system — grind, repair, coat, and broadcast flake in a single visit, walk-on the next day. We schedule around Northeast Florida's humidity so the floor cures correctly, and we confirm the timeline after the free on-site slab assessment.